Design tool
Design Your Garage Floor
Pick from our 27 stocked flake blends, upload a photo of your garage to see one on your own floor, then get a rough estimate at $4.50 per sq ft and book a free onsite inspection — all in one place.
Can I see what an epoxy floor would look like in my garage?
Short answer
Yes. Pick from our 27 stocked flake blends, upload a photo of your own garage, and the tool puts that blend on your floor — labelled as an AI preview, not a rendering of the finished job. You also get a rough estimate at $4.50 per square foot with a $1,000 minimum, and it shows the arithmetic.
- Colorcomplete
- Garage
- Slab
- Estimate
Choose your floor colour
Preview this blend on a photo of your garage
See a blend on your own floor
Take or upload a photo of your garage. We change the floor and leave everything else exactly where it is.
Our install in Katy, TX — Stone Wash flake
Your photo is used to generate the preview and is not kept. Stand back far enough to see the whole floor, open the garage door for light, and keep the camera straight.
Your selection
Cabin Fever
Neutral · mid-tone
Flake sample
Grey, tan, white and black in near-equal measure — a balanced warm-and-cool mix.
Choose your color
Your Houston Superior Epoxy system
- Preparation
- Diamond-ground concrete
- Base coat
- Citadel SLE-100 epoxy base coat
- Broadcast
- Vinyl flake, broadcast to refusal
- Topcoat
- Polyaspartic F61 clear topcoat
Limited Lifetime Workmanship Warranty on qualifying residential garage floor installations on qualifying installations, subject to the written terms.
Your project
Tell us about the space
Your rough estimate
Give us the garage size above — a typical size, your measurements, or the square footage — and your rough estimate appears here.
Get it in writing
Send your details and we'll bring physical samples of your shortlist to a free onsite inspection, then put the final scope and price in writing. No payment up front.
Cabin Fever
Tap continue to size it
Design first, then price it
Start with the part you actually care about — the colour. Pick a flake blend, then upload a photo of your garage and see that blend on your own floor before anything else. Then tell us how big the garage is and you get a rough estimate with the arithmetic shown, not a number invented to win a click.
The blend you land on here is a shortlist, not a final answer. We bring the physical sample boards to your free inspection and look at them on your own slab, under your own light, because that is the only place the colour is real.
Why your own lighting matters
The single most common colour regret in a garage is a dark blend chosen in a bright showroom and installed in a space with one bulb and no windows. That is exactly why the preview works from a photo of your garage rather than a showroom shot, and why we push mid-tone, multi-colour blends for working garages — they hold up under the light you actually have and hide dust and tire marks between cleanings.
Questions
How the designer works
Is the preview what my floor will actually look like?
No — it is an AI preview to help you narrow down, not a rendering of your finished floor. It edits your photo to show roughly how a blend reads in that space. On a real floor the chips sit in a pigmented base under a clear topcoat and are broadcast by hand, so the finished surface reads slightly darker and calmer and will never match the preview chip for chip. We bring physical boards to your inspection and choose the final colour on your own slab.
Where does the price come from?
Square footage times $4.50, with a $1,000 minimum on any garage. That is the whole calculation and the page shows you every step of it. It is a rough estimate, not a quote: nothing in that arithmetic can see your concrete, so removing an old coating, repairing or moisture-treating the slab, or coating stem walls and steps may change the final price. We confirm it in writing after the free onsite inspection.
What happens after I submit?
Your details are saved and you pick a two-hour arrival window for a free onsite inspection right here — no third-party scheduler. We confirm by phone, bring sample boards of your shortlist, and put the final scope and price in writing. There is no payment up front.
Can I change the blend later?
Yes, right up until the material is ordered for your job. The preview is for narrowing down; nothing is locked in by using it.
Prefer to see the full color range first?
Every blend we stock is on the colors page, grouped light to dark. Build a shortlist there, then come back and preview your favorites on the floor.
- $2M general liability + workers’ comp
- Written workmanship warranty
- No upfront payment